array_keys
If you want to pass an argument like ENT_QUOTES to htmlentities, you can do the follow.
<?php
$array = array_map( 'htmlentities' , $array, array_fill(0 , count($array) , ENT_QUOTES) );
?>
The third argument creates an equal sized array of $array filled with the parameter you want to give with your callback function.
array_map
(PHP 4 >= 4.0.6, PHP 5)
array_map — Aplica uma função em todos os elementos dos arrays dados
Descrição
array_map() retorna um array contendo todos os elementos de arr1 depois de aplicada uma determinada função em cada um. O número de parâmetros que esta função aceita deve coincidir com o número de arrays passados para a array_map()
Parâmetros
- callback
-
Função callback para executar para cada elementos dos arrays.
- arr1
-
Um array para percorrer chamando função callback .
- array
-
Variável lista de argumentos array para percorrer chamando a função callback .
Valor Retornado
Retorna um array contendo todos elementos de arr1 depois de ter aplicado a função callback para cada um.
Exemplos
Exemplo #1 Exemplo de array_map()
<?php
function cubo($n)
{
return $n*$n*$n;
}
$a = array(1, 2, 3, 4, 5);
$b = array_map("cubo", $a);
print_r($b);
?>
E programa acima faz com que $b tenha:
Array ( [0] => 1 [1] => 8 [2] => 27 [3] => 64 [4] => 125 )
Exemplos
Exemplo #2 array_map() - usando mais de um array
<?php
function mostrar_Espanhol($n, $m)
{
return "O número $n é chamado de $m na Espanha";
}
function map_Espanhol($n, $m)
{
return array($n => $m);
}
$a = array(1, 2, 3, 4, 5);
$b = array("uno", "dos", "tres", "cuatro", "cinco");
$c = array_map("mostrar_Espanhol", $a, $b);
print_r($c);
$d = array_map("map_Espanhol", $a , $b);
print_r($d);
?>
O exemplo acima irá imprimir:
// Saída de $c Array ( [0] => O número 1 é chamado de uno na Espanha [1] => O número 2 é chamado de dos na Espanha [2] => O número 3 é chamado de tres na Espanha [3] => O número 4 é chamado de cuatro na Espanha [4] => O número 5 é chamado de cinco na Espanha ) // Saída de $d Array ( [0] => Array ( [1] => uno ) [1] => Array ( [2] => dos ) [2] => Array ( [3] => tres ) [3] => Array ( [4] => cuatro ) [4] => Array ( [5] => cinco ) )
Normalmente quando se usa dois ou mais arrays, eles devem ter o mesmo tamanho porque a função callback é aplicada paralelamente nos elementos correpondentes. Se os arrays tem tamanhos diferentes, o menor array será extendido com elementos vazios.
Uma forma interessante de se usar esta função é na construção de um array de arrays, o que pode ser facilmente feito usando NULL como o nome da função callback.
Exemplo #3 Criando um array de arrays
<?php
$a = array(1, 2, 3, 4, 5);
$b = array("um", "dois", "tres", "quatro", "cinco");
$c = array("uno", "dos", "tres", "cuatro", "cinco");
$d = array_map(null, $a, $b, $c);
print_r($d);
?>
O exemplo acima irá imprimir:
Array ( [0] => Array ( [0] => 1 [1] => one [2] => uno ) [1] => Array ( [0] => 2 [1] => two [2] => dos ) [2] => Array ( [0] => 3 [1] => three [2] => tres ) [3] => Array ( [0] => 4 [1] => four [2] => cuatro ) [4] => Array ( [0] => 5 [1] => five [2] => cinco ) )
Se o array do argumento contém chaves string, então o array retornado conterá chaves string se e somente se exatamente um array é passado. Se mais que um argumento é passado, então o array retornado sempre terá chaves inteiras.
Exemplo #4 array_map() - com chaves string
<?php
$arr = array("stringkey" => "value");
function cb1($a) {
return array ($a);
}
function cb2($a, $b) {
return array ($a, $b);
}
var_dump(array_map("cb1", $arr));
var_dump(array_map("cb2", $arr, $arr));
var_dump(array_map(null, $arr));
var_dump(array_map(null, $arr, $arr));
?>
O exemplo acima irá imprimir:
array(1) { ["stringkey"]=> array(1) { [0]=> string(5) "value" } } array(1) { [0]=> array(2) { [0]=> string(5) "value" [1]=> string(5) "value" } } array(1) { ["stringkey"]=> string(5) "value" } array(1) { [0]=> array(2) { [0]=> string(5) "value" [1]=> string(5) "value" } }
add a note
User Contributed Notesarray_map
stijnleenknegt at gmail dot com
23-Jul-2008 01:17
23-Jul-2008 01:17
GUI
26-Jun-2008 04:48
26-Jun-2008 04:48
The following takes an array of objects, and returns the result of calling a member function on each object. So if I have an array of objects that all have a getName() method, calling array_map_objects("getName", $thingies) will return the array filled with the getName() value for each object.
<?php
function array_map_objects($member_function, $array) {
$values = array();
if(is_string($member_function) && is_array($array)) {
$callback = create_function('$e', 'return call_user_func(array($e, "' . $member_function .'"));');
$values = array_map($callback, $array);
}
return $values;
}
?>
BloodElf
27-Apr-2008 03:32
27-Apr-2008 03:32
Here is a simple way to highlight the matched words in the search results:
<?php
function highlight($word) {
static $num = 1;
return '<span class="word' . $num++ . '">' . $word . '</span>';
}
$text = "ala bala nica turska panica";
$search = "bala turska";
$words = explode(' ', $search);
echo str_replace($words, array_map("highlight", $words), $text);
moester at gmail dot com
02-Apr-2008 11:21
02-Apr-2008 11:21
Wish this was built in. Mimics Ruby and Prototype's array pluck function. Returns specific key/column from an array of objects.
<?php
function array_pluck($key, $array)
{
if (is_array($key) || !is_array($array)) return array();
$funct = create_function('$e', 'return is_array($e) && array_key_exists("'.$key.'",$e) ? $e["'. $key .'"] : null;');
return array_map($funct, $array);
}
// usage:
$a = array(array("id"=>10, "name"=>"joe"), array("id"=>11, "name"=>"bob"));
$ids = array_pluck("id", $a); // == array(10,11)
$names = array_pluck("name", $a); // == array("joe", "bob")
//works on non-keyed arrays also:
$a = array(array(3,4), array(5,6));
$col2 = array_pluck(1,$a); // == array(4,6) (grab 2nd column of data)
?>
chreekat
13-Mar-2008 12:48
13-Mar-2008 12:48
I was miffed that array_map didn't have a way to pass values *and* keys to the callback, but then I realized I could do this:
function callback($k, $v) { ... }
array_map( "callback", array_keys($array), $array);
jo at ho dot nl
17-Feb-2008 11:10
17-Feb-2008 11:10
Could also use things like...
array_keys(); and array_values(); offcourse...
However it's just an example off recursion via this function..
Which I found pretty handy at times dealing with arrays..
could also use:
<?php
call_user_func(array($this, __FUNCTION), $args);
?>
or
<?php
call_user_fuc_array(array($this, __FUNCTION__), $array);
?>
or
<?php
class{
public function __construct($arg){
if(is_array($arg)){
new self($arg);
}
else{
echo $arg.'<br/>'.PHP_EOL;
}
}
}
?>
Anyway.. plenty off examples..
It was just an idea for others...
avartabedian at webservice dot com dot uy
08-Feb-2008 02:39
08-Feb-2008 02:39
loaded67 at hotmail dot com, there is a little error in the add func params values.
Warning: Missing argument 2 for test::add(), called in /tmp/test.php on line 34 and defined in /tmp/test.php on line 6
Array => <br/>
now it runs...
<?php
class test{
//private $container = array();
final public function add($key, $value=NULL){
/* params values fix */
$value = $value==NULL?$key:$value;
/* recursion */
if(is_array($value)){
array_map(array($this, __FUNCTION__), array_keys($value), array_values($value));
}
/* procedural */
else{
echo $key.' => '.$value.'<br/>'.PHP_EOL;
// do stuff...
// if(!isset($this->container[$key])){
// $this->container[$key] = $value;
// }
//else{ // trigger_error() xor throw new Exception?
// echo 'allready exists!<br/>'.PHP_EOL;
//}
}
}
}
//
$array = array (
'one' => 'value1',
'two' => 'value2',
'three' => 'value3'
);
$t = new test;
$t->add($array);
?>
good luck!
loaded67 at hotmail dot com
08-Feb-2008 11:59
08-Feb-2008 11:59
this function is really nice for recursion in php!!!
example in a class:
<?php
class test{
//private $container = array();
final public function add($key, $value){
/* recursion */
if(is_array($value)){
array_map(array($this, __FUNCTION__), array_keys($value), array_values($value));
}
/* procedural */
else{
echo $key.' => '.$value.'<br/>'.PHP_EOL;
// do stuff...
// if(!isset($this->container[$key])){
// $this->container[$key] = $value;
// }
//else{ // trigger_error() xor throw new Exception?
// echo 'allready exists!<br/>'.PHP_EOL;
//}
}
}
}
//
$array = array (
'one' => 'value1',
'two' => 'value2',
'three' => 'value3'
);
$t = new test;
$t->add($array);
?>
you could easiely do this without a class too offcourse!
used in php 5.2.5
pmf
23-Jan-2008 04:02
23-Jan-2008 04:02
This function behaves exactly like array_map but additionally does not reject non-array arguments. Instead, it transforms them with the array_fill function to a constant valued array of required length according to the other array arguments (if any) and executes the original array_map function.
<?php
function array_map2() {
$args = func_get_args();
$callback = array_shift($args);
$args = array_map(
create_function('$a,$max','return is_array($a)? $a: array_fill(0,$max,$a);'),
$args,array_fill(0,count($args),array_reduce($args,
create_function('$v,$w','return max($v,is_array($w)? count($w): 1);'))));
array_unshift($args,$callback);
return call_user_func_array("array_map",$args);
}
?>
Example:
<?php
$get = "first=value1&second=value2&third=value3";
print_r(array_map2("explode","=",explode("&",$get)));
?>
would print out:
<?php
Array
(
[0] => Array
(
[0] => first
[1] => value1
)
[1] => Array
(
[0] => second
[1] => value2
)
[2] => Array
(
[0] => third
[1] => value3
)
)
?>
/pmf
henrique at webcoder dot com dot br
01-Nov-2007 05:02
01-Nov-2007 05:02
Adding method support to function by Andref (multidimensionalArrayMap).
function array_map_r( $func, $arr )
{
$newArr = array();
foreach( $arr as $key => $value )
{
$newArr[ $key ] = ( is_array( $value ) ? array_map_r( $func, $value ) : ( is_array($func) ? call_user_func_array($func, $value) : $func( $value ) ) );
}
return $newArr;
}
array_map_r('function', array());
or
array_map_r(array('class', 'method'), array());
bturchik at iponweb dot net
19-Jul-2007 04:46
19-Jul-2007 04:46
Maybe this one will be useful for someone:
function array_map_helper($mapper, $array) {
$mapper = preg_replace('/^return (.*?);$/', '$1', trim($mapper));
$result = array();
if (preg_match('/(\(?)(.*?)\s*=>\s*(.*?)(\)?)$/', $mapper, $matches)) {
list($full_found, $array_open, $left, $right, $array_close) = $matches;
if ($array_open && $array_close) {
$mapper = '$result[] = array' . $full_found . ';';
} else {
$mapper = '$result[' . $left . '] = ' . $right . ';';
}
} else {
$mapper = '$result[] = ' . $mapper . ';';
}
foreach ($array as $key => $value) {
eval($mapper);
}
return $result;
}
should be used like:
$array = array(array('foo' => 11, 'bar' => 22),
array('foo' => 111, 'bar' => 222),
array('foo' => 1111, 'bar' => 2222));
$mapped = array_map_helper('$value["foo"] => $value["bar"]', $array);
var_dump will give
array(3) {
[11]=>
int(22)
[111]=>
int(222)
[1111]=>
int(2222)
}
or
$mapped = array_map_helper('$value["foo"]', $array);
var_dump will give
array(3) {
[0]=>
int(11)
[1]=>
int(111)
[2]=>
int(1111)
}
or
$mapped = array_map_helper('$value["foo"] + $value["bar"] . " at position $key"', $array);
var_dump will give
array(3) {
[0]=>
string(16) "33 at position 0"
[1]=>
string(17) "333 at position 1"
[2]=>
string(18) "3333 at position 2"
}
andref dot dias at pronus dot eng dot br
24-Oct-2006 09:14
24-Oct-2006 09:14
A recursive way to handle multidimensional arrays:
<?php
function multidimensionalArrayMap( $func, $arr )
{
$newArr = array();
foreach( $arr as $key => $value )
{
$newArr[ $key ] = ( is_array( $value ) ? multidimensionalArrayMap( $func, $value ) : $func( $value ) );
}
return $newArr;
}
?>
pcdinh at phpvietnam dot net
18-Mar-2006 05:50
18-Mar-2006 05:50
Hi benjaminhill,
You can apply a method of a instantiated class to array_maps as follows:
class Maths {
function addOne($input) {
return ($input + 1);
}
}
$maths = new Maths();
$sum = array_map(array($maths, \\\'addOne\\\'), array(1, 2));
// where $maths is the object which has been instantiated before and addOne is its method without its own parameters
var_dump($sum);
The code fragment will return:
array
0 => 2
1 => 3
However, I love a syntax like this:
$sum = array_map($maths->addOne($this), array(1, 2));
where $this should be interpreted as each values extracted from the subsequent array, which in this case is array(1, 2).
This syntax reminds me of Javascript syntax.
PHP\\\'s callback mechanism should be improved.
26-Aug-2005 03:57
Here's a function, very helpfull to me, that allows you to map your callback on mixed args.
<?php
function array_smart_map($callback) {
// Initialization
$args = func_get_args() ;
array_shift($args) ; // suppressing the callback
$result = array() ;
// Validating parameters
foreach($args as $key => $arg)
if(is_array($arg)) {
// the first array found gives the size of mapping and the keys that will be used for the resulting array
if(!isset($size)) {
$keys = array_keys($arg) ;
$size = count($arg) ;
// the others arrays must have the same dimension
} elseif(count($arg) != $size) {
return FALSE ;
}
// all keys are suppressed
$args[$key] = array_values($arg) ;
}
// doing the callback thing
if(!isset($size))
// if no arrays were found, returns the result of the callback in an array
$result[] = call_user_func_array($callback, $args) ;
else
for($i=0; $i<$size; $i++) {
$column = array() ;
foreach($args as $arg)
$column[] = ( is_array($arg) ? $arg[$i] : $arg ) ;
$result[$keys[$i]] = call_user_func_array($callback, $column) ;
}
return $result ;
}
?>
Trying with :
<?php
// $_GET is ?foo=bar1-bar2-bar3&bar=foo1
print_r(array_smart_map('explode', '-', $_GET)) ;
?>
Returns :
array(
[foo] => array(
0 => bar1
1 => bar2
2 => bar3
)
[bar] => array(
1 => foo1
)
)
david dot tulloh at infaze dot com dot au
07-Jul-2005 01:53
07-Jul-2005 01:53
You can pass values to array_map by reference, essentially allowing you to use it as you would array_walk with multiple arrays as parameters.
A trivial example:
<?php
$a = array(1,2,3,4,5);
$add_func = create_function('&$x, $y', '$x+=$y;');
array_map($add_func, $a, $a);
print_r($a);
?>
Array
(
[0] => 2
[1] => 4
[2] => 6
[3] => 8
[4] => 10
)
Vinicius Cubas Brand
23-Mar-2005 02:31
23-Mar-2005 02:31
The following function does exaclty the same thing of array_map. However, maintains the same index of the input arrays
<?php
function array_map_keys($param1,$param2,$param3=NULL)
{
$res = array();
if ($param3 !== NULL)
{
foreach(array(2,3) as $p_name)
{
if (!is_array(${'param'.$p_name}))
{
trigger_error(__FUNCTION__.'(): Argument #'.$p_name.' should be an array',E_USER_WARNING);
return;
}
}
foreach($param2 as $key => $val)
{
$res[$key] = call_user_func($param1,$param2[$key],$param3[$key]);
}
}
else
{
if (!is_array($param2))
{
trigger_error(__FUNCTION__.'(): Argument #2 should be an array',E_USER_WARNING);
return;
}
foreach($param2 as $key => $val)
{
$res[$key] = call_user_func($param1,$param2[$key]);
}
}
return $res;
}
?>
For instance:
<?php
$arr1 = array(
'3' => 'a',
'4' => 'b',
'5' => 'c'
);
$arr2 = array(
'3' => 'd',
'4' => 'e',
'5' => 'f'
);
$arr3 = array_map_keys(create_function('$a,$b','return $a.$b;'),$arr1,$arr2);
print_r($arr3);
?>
The result will be:
Array
(
[3] => ad
[4] => be
[5] => cf
)
endofyourself at yahoo dot com
20-Feb-2005 08:29
20-Feb-2005 08:29
If you need to call a static method from array_map, this will NOT work:
<?PHP
array_map('myclass::myMethod' , $value);
?>
Instead, you need to do this:
<?PHP
array_map( array('myclass','myMethod') , $value);
?>
It is helpful to remember that this will work with any PHP function which expects a callback argument.
nd0 at gmx dot de
02-Jul-2004 01:42
02-Jul-2004 01:42
array_map works also fine with create_function:
<?php
$a = array(1, 2, 3, 4, 5);
$b = array_map(create_function('$n', 'return $n*$n*$n;'), $a);
print_r($b);
?>
if you want to manipulate the elements of the array, instead to on a copy,
than take a look at array_walk:
<?php
$a = array(1, 2, 3, 4, 5);
array_walk($a, create_function('&$n', '$n = $n*$n*$n;'));
print_r($a);
?>
The Result of both is:
Array
(
[0] => 1
[1] => 8
[2] => 27
[3] => 64
[4] => 125
)
bishop
10-Apr-2004 02:07
10-Apr-2004 02:07
Occasionally, you may find that you need to pull out a column (or several) from an array. Here's a map-like function to do that:
<?php
function &array_shear(&$arrays, $idx1 /* ... */) {
$indexes = func_get_args();
array_shift($indexes);
$newArrays = array ();
foreach (array_keys($arrays) as $arrayKey) {
$newArray = array ();
foreach ($indexes as $index) {
$newArray[$index] = $arrays[$arrayKey][$index];
unset($arrays[$arrayKey][$index]);
}
$newArrays[$arrayKey] = $newArray;
}
return $newArrays;
}
?>
So, doing this:
<?php
$t1 = array (
2 => array ('a', 'b', 'c'),
1 => array ('d', 'e', 'f'),
5 => array ('g', 'h', 'i'),
);
$t2 = array_shear($t1, 1, 0);
?>
will result in:
<?php
$t1 = array (
2 => array ( 2 => 'c', ),
1 => array ( 2 => 'f', ),
5 => array ( 2 => 'i', ),
);
$t2 = array (
2 => array ( 1 => 'b', 0 => 'a', ),
1 => array ( 1 => 'e', 0 => 'd', ),
5 => array ( 1 => 'h', 0 => 'g', ),
);
?>
stephen at mu dot com dot au
07-Jan-2003 07:02
07-Jan-2003 07:02
A note when doing something allong the lines of:
<?php
class foo {
var $var;
function bar() {
array_map(array($this, "baz"), array(1,2,3));
}
function baz($arg) {
$this->var = $this->var + $arg;
}
}
?>
This will *not* work as expected. You need to pass $this by reference as with:
array_map(array(&$this, "baz"), array(1,2,3));
or you'll be making a copy of the object each time, changing a value, then throwing the result away.
dan at mojavelinux dot com
15-Jun-2002 07:07
15-Jun-2002 07:07
Here is a better, more true version of a deep array_map. The only negative of this function is that the array is passed by reference, so just be aware of that. (patches welcome)
<?php
function array_map_deep(&$in_array, $in_func, $in_args = array(), $in_index = 1) {
// fix people from messing up the index of the value
if ($in_index < 1) {
$in_index = 1;
}
foreach (array_keys($in_array) as $key) {
// we need a reference, not a copy, normal foreach won't do
$value =& $in_array[$key];
// we need to copy args because we are doing
// manipulation on it farther down
$args = $in_args;
if (is_array($value)) {
array_map_deep($value, $in_func, $in_args, $in_index);
}
else {
array_splice($args, $in_index - 1, $in_index - 1, $value);
$value = call_user_func_array($in_func, $args);
}
}
return $in_array;
}
?>
This is a neat function because you can pass an array, a function, and an array of parameters, and finally, and index of where in the array of parameters for the callback function the contents you are mapping should get replaced. This index is human based (starts at 1), and can be used in something like a preg_replace callback, where the contents must be the 3rd index. Enjoy!