PHP 8.3.4 Released!

O básico

class

A definição de uma classe começa com a palavra chave class, seguida do nome da classe, seguido de um par de chaves que englobam as definições de propriedades e métodos pertencentes à classe.

O nome de uma classe tem de ser válido, que não seja uma palavra reservada do PHP. Um nome de classe válido começa com uma letra ou sublinhado, seguido de qualquer sequência de letras, números e sublinhados. Como uma expressão regular, pode ser expressada assim: ^[a-zA-Z_\x80-\xff][a-zA-Z0-9_\x80-\xff]*$.

Uma classe pode conter suas próprias constantes, variáveis (chamadas de "propriedades") e funções (chamadas de "métodos").

Exemplo #1 Definição Simples de uma Classe

<?php
class SimpleClass
{
// declaração de propriedade
public $var = 'um valor padrão';

// declaração de método
public function displayVar() {
echo
$this->var;
}
}
?>

A pseudo-variável $this está disponível quando um método é chamado a partir de um contexto de um objeto. $this é o valor do objeto chamado.

Aviso

Chamar um método não estático de maneira estática lança um Error. Anteriormente ao PHP 8.0.0, isto iria gerar um aviso de descontinuação, e $this estaria indefinido.

Exemplo #2 Alguns exemplos da pseudo variável $this

<?php
class A
{
function
foo()
{
if (isset(
$this)) {
echo
'$this está definida (';
echo
get_class($this);
echo
")\n";
} else {
echo
"\$this não está definida.\n";
}
}
}

class
B
{
function
bar()
{
A::foo();
}
}

$a = new A();
$a->foo();

A::foo();

$b = new B();
$b->bar();

B::bar();
?>

Saída do exemplo acima no PHP 7:

$this está definida (A)

Deprecated: Non-static method A::foo() should not be called statically in %s  on line 27
$this não está definida.

Deprecated: Non-static method A::foo() should not be called statically in %s  on line 20
$this não está definida.

Deprecated: Non-static method B::bar() should not be called statically in %s  on line 32

Deprecated: Non-static method A::foo() should not be called statically in %s  on line 20
$this não está definida.

Saída do exemplo acima no PHP 8:

$this está definida (A)

Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27
Stack trace:
#0 {main}
  thrown in %s  on line 27

Classes somente leitura

A partir do PHP 8.2.0, uma classe pode ser marcada com o modificador readonly. Marcar uma classe como readonly irá acrescentar o modificador readonly em cada propriedade declarada, e prevenir a criação de propriedades dinâmicas. Além disso será impossível de acrescentar suportes a propriedades dinâmicas utilizando o atributo AllowDynamicProperties. Acrescentar o atributo em classes somente leitura irá disparar um erro de compilação.

<?php
#[\AllowDynamicProperties]
readonly class
Foo {
}

// Fatal error: Cannot apply #[AllowDynamicProperties] to readonly class Foo
?>

As neither untyped, nor static properties can be marked with the readonly modifier, readonly classes cannot declare them either:

<?php
readonly class Foo
{
public
$bar;
}

// Fatal error: Readonly property Foo::$bar must have type
?>
<?php
readonly class Foo
{
public static
int $bar;
}

// Fatal error: Readonly class Foo cannot declare static properties
?>

Uma classe readonly pode ser estendida se, e somente se, a classe filha também ser uma classe readonly.

new

Para criar uma instância de uma classe, a instrução new deve ser utilizada. Um objeto sempre será criado a não ser que a classe tenha um construtor definido que dispare uma exceção em caso de erro. Classes devem ser definidas antes de instanciadas (e em alguns casos isso é obrigatório).

Se uma string contendo o nome da classe é utilizado com new, uma nova instância da classe será criada. Se a classe estiver dentro de um namespace, o nome completo e qualificado deve ser utilizado para fazer isso.

Nota:

Se não há argumentos a serem passados para o construtor da classe, os parênteses após o nome da classe podem ser omitidos.

Exemplo #3 Criando uma instância

<?php
$instance
= new SimpleClass();

// Também pode ser feito com uma variável:
$className = 'SimpleClass';
$instance = new $className(); // new SimpleClass()
?>

A partir do PHP 8.0.0, usar new com expressões arbitrárias é suportado. Isso permite instanciação mais complexa se a expressão produzir uma string. As expressões devem ser envolvidas em parênteses.

Exemplo #4 Criando uma instância usando uma expressão arbitrária

No exemplo fornecido mostramos múltiplos exemplos de expressões arbitrárias válidas que produzem um nome de classe. Isto mostra uma chamada para uma função, concatenação de string, e a constante ::class.

<?php

class ClasseA extends \stdClass {}
class
ClasseB extends \stdClass {}
class
ClasseC extends ClasseB {}
class
ClasseD extends ClasseA {}

function
obterAlgumaClasse(): string
{
return
'ClasseA';
}

var_dump(new (obterAlgumaClasse()));
var_dump(new ('Classe' . 'B'));
var_dump(new ('Classe' . 'C'));
var_dump(new (ClasseD::class));
?>

Saída do exemplo acima no PHP 8:

object(ClasseA)#1 (0) {
}
object(ClasseB)#1 (0) {
}
object(ClasseC)#1 (0) {
}
object(ClasseD)#1 (0) {
}

No contexto da classe, é possível criar um novo objeto com new self e new parent.

Ao atribuir uma instância de uma classe já criada, a uma variável nova, a variável nova irá acessar a mesma instância do objeto que foi atribuído. Este comportamento se mantém ao se passar instâncias a uma função. Uma cópia de um objeto criado pode ser feita clonando o mesmo.

Exemplo #5 Atribuição de Objetos

<?php

$instance
= new SimpleClass();

$assigned = $instance;
$reference =& $instance;

$instance->var = '$assigned terá esse valor';

$instance = null; // $instance e $reference tornam-se nulos

var_dump($instance);
var_dump($reference);
var_dump($assigned);
?>

O exemplo acima produzirá:

NULL
NULL
object(SimpleClass)#1 (1) {
   ["var"]=>
     string(30) "$assigned terá esse valor"
}

É possível usar algumas formas de criar instâncias de um objeto:

Exemplo #6 Criando novos objetos

<?php
class Test
{
static public function
getNew()
{
return new static;
}
}

class
Child extends Test
{}

$obj1 = new Test();
$obj2 = new $obj1;
var_dump($obj1 !== $obj2);

$obj3 = Test::getNew();
var_dump($obj3 instanceof Test);

$obj4 = Child::getNew();
var_dump($obj4 instanceof Child);
?>

O exemplo acima produzirá:

bool(true)
bool(true)
bool(true)

É possível acessar um membro do objeto recém criado em uma expressão simples:

Exemplo #7 Access member of newly created object

<?php
echo (new DateTime())->format('Y');
?>

O exemplo acima produzirá algo semelhante a:

2016

Nota: Anteriormente ao PHP 7.1, os argumentos não são avaliados se não houver um construtor definido.

Propriedades e métodos

Propriedades e métodos de classe vivem em "namespaces" separados, de forma que é possível ter uma propriedade e método com mesmos nomes. A referência a propriedades e métodos tem a mesma notação, e a decisão de se uma propriedade será acessada ou uma chamada a um método feita, depende somente do contexto, ou seja, se está tentando acessar uma variável ou chamar um método.

Exemplo #8 Acesso a propriedade vs. chamar um método

<?php
class Foo
{
public
$bar = 'propriedade';

public function
bar() {
return
'métod';
}
}

$obj = new Foo();
echo
$obj->bar, PHP_EOL, $obj->bar(), PHP_EOL;

O exemplo acima produzirá:

propriedade
método

Isto significa que chamar diretamente uma função anônima atribuída a uma propriedade não é possível. Em vez disso, por exemplo, a propriedade deve primeiro ser atribuída a uma variável. É possível chamar uma propriedade diretamente a colocando entre parênteses.

Exemplo #9 Chamando uma função anônima armazenada em uma propriedade

<?php
class Foo
{
public
$bar;

public function
__construct() {
$this->bar = function() {
return
42;
};
}
}

$obj = new Foo();

echo (
$obj->bar)(), PHP_EOL;

O exemplo acima produzirá:

42

extends

Uma classe pode herdar constantes, métodos e propriedades de outra classe usando a palavra-chave extends na declaração da classe. Não é possível herdar múltiplas classes; uma classe só pode herdar uma classe base.

Os métodos e propriedades herdados podem ser sobrescritos declarando-os com o mesmo nome definido na classe base. Entretanto, se a classe mãe definiu um método ou constante como final, eles não poderão ser sobrescritos. É possível acessar os métodos sobrescritos ou propriedades estáticas referenciado-os com parent::.

Nota: A partir do PHP 8.1.0, constantes podem ser declaradas como finais.

Exemplo #10 Herança da Classe Simples

<?php
class ExtendClass extends SimpleClass
{
// Redefine o método pai
function displayVar()
{
echo
"Classe Herdeira\n";
parent::displayVar();
}
}

$extended = new ExtendClass();
$extended->displayVar();
?>

O exemplo acima produzirá:

Classe Herdeira
um valor padrão

Regras de compatibilidade de assinaturas

Quando sobrescrevendo um método, sua assinatura precisa ser compatível com o método original. De outra forma um erro fatal é emitido, ou, anteriormente ao PHP 8.0.0, um aviso E_WARNING seria gerado. Uma assinatura é compatível se ela respeita as regras de variância, se torna um parâmetro obrigatório em opcional, se adiciona novos parâmetros opcionais, e se não restringe ou apenas aumenta a visibilidade. Isso é conhecido como Princípio de Substituição de Liskov, ou LSP. O construtor, e membros private não precisam seguir essas regras de compatibilidade, e portanto não há emissão de erros fatais no caso de assinaturas incompatíveis.

Exemplo #11 Métodos compatíveis

<?php

class Base
{
public function
foo(int $a) {
echo
"Valid\n";
}
}

class
Extend1 extends Base
{
function
foo(int $a = 5)
{
parent::foo($a);
}
}

class
Extend2 extends Base
{
function
foo(int $a, $b = 5)
{
parent::foo($a);
}
}

$extended1 = new Extend1();
$extended1->foo();
$extended2 = new Extend2();
$extended2->foo(1);

O exemplo acima produzirá:

Valid
Valid

Os exemplos a seguir demonstram que um método derivado que remove um parâmetro, ou torna um parâmetro opcional em mandatório não é compatível com o método original.

Exemplo #12 Erro fatal quando um método derivado remove um parâmetro

<?php

class Base
{
public function
foo(int $a = 5) {
echo
"Válido?\n";
}
}

class
Extend extends Base
{
function
foo()
{
parent::foo(1);
}
}

A saída do exemplo acima no PHP 8 é semelhante a:

Fatal error: Declaration of Extend::foo() must be compatible with Base::foo(int $a = 5) in /in/evtlq on line 13

Exemplo #13 Erro falta quando um método derivado transforma um parâmetro opcional em mandatório

<?php

class Base
{
public function
foo(int $a = 5) {
echo
"Válido?\n";
}
}

class
Extend extends Base
{
function
foo(int $a)
{
parent::foo($a);
}
}

A saída do exemplo acima no PHP 8 é semelhante a:

Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 13
Aviso

Renomear um nome de parâmetro em uma classe derivada não é uma quebra de assinatura. Entretanto isso é desencorajado porque ocasionará em um Error se argumentos nomeados forem utilizados na chamada.

Exemplo #14 Erro ao utilizar argumentos nomeados renomeados em uma classe derivada

<?php

class A {
public function
test($foo, $bar) {}
}

class
B extends A {
public function
test($a, $b) {}
}

$obj = new B;

// Passando parâmetros de acordo com o contrato de A::test()
$obj->test(foo: "foo", bar: "bar"); // ERROR!

O exemplo acima produzirá algo semelhante a:

Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14
Stack trace:
#0 {main}
  thrown in /in/XaaeN on line 14

::class

A palavra-chave class também pode ser utilizada para resolução de nome de classes. Pode-se obter o nome completo e qualificado da classe ClassName utilizando ClassName::class. Isso é particularmente útil em classes com namespaces.

Exemplo #15 Resolução de nome da classe

<?php
namespace NS {
class
ClassName {
}

echo
ClassName::class;
}
?>

O exemplo acima produzirá:

NS\ClassName

Nota:

A resolução do nome de classe através de ::class é uma transformação em tempo de compilação. Isso significa que no momento que o texto do nome da classe é criado o autoloading ainda não ocorreu. Como consequẽncia, nomes de classe são expandidos mesmo se a classe não existir. Não é emitido erro nesses casos.

Exemplo #16 Resolução de um nome de classe de classe ausente

<?php
print Does\Not\Exist::class;
?>

O exemplo acima produzirá:

Does\Not\Exist

A partir do PHP 8.0.0, a constante ::class também pode ser utilizada em objetos. Essa resolução acontece em tempo de execução, e não em tempo de compilação. O efeito é o mesmo de chamar get_class() em um objeto.

Exemplo #17 Resolução de nome de objeto

<?php
namespace NS {
class
ClassName {
}
}
$c = new ClassName();
print
$c::class;
?>

O exemplo acima produzirá:

NS\ClassName

Métodos e propriedades nullsafe

A partir do PHP 8.0.0, propriedades e métodos também podem ser acessados com o operador "nullsafe": ?->. O operador nullsafe funciona da mesma forma que os acessos de métodos e variáveis, exceto que se o objeto referenciado é null, então null será retornado ao invés de uma exceção ser lançada. Se uma derreferência for parte de uma cadeia de chamadas, o resto da cadeia é ignorado.

O resultado é similar a encapsular cada acesso dentro de um teste is_null(), mas mais compacto.

Exemplo #18 Operador nullsafe

<?php

// A partir do PHP 8.0.0, esta linha:
$result = $repository?->getUser(5)?->name;

// É o equivalente ao seguinte código:
if (is_null($repository)) {
$result = null;
} else {
$user = $repository->getUser(5);
if (
is_null($user)) {
$result = null;
} else {
$result = $user->name;
}
}
?>

Nota:

O operador nullsafe é melhor utilizado quando null é considerado um valor válido e esperado de uma propriedade ou retorno de método. Para indicar um erro, uma exceção lançada é preferível.

add a note

User Contributed Notes 11 notes

up
635
aaron at thatone dot com
16 years ago
I was confused at first about object assignment, because it's not quite the same as normal assignment or assignment by reference. But I think I've figured out what's going on.

First, think of variables in PHP as data slots. Each one is a name that points to a data slot that can hold a value that is one of the basic data types: a number, a string, a boolean, etc. When you create a reference, you are making a second name that points at the same data slot. When you assign one variable to another, you are copying the contents of one data slot to another data slot.

Now, the trick is that object instances are not like the basic data types. They cannot be held in the data slots directly. Instead, an object's "handle" goes in the data slot. This is an identifier that points at one particular instance of an obect. So, the object handle, although not directly visible to the programmer, is one of the basic datatypes.

What makes this tricky is that when you take a variable which holds an object handle, and you assign it to another variable, that other variable gets a copy of the same object handle. This means that both variables can change the state of the same object instance. But they are not references, so if one of the variables is assigned a new value, it does not affect the other variable.

<?php
// Assignment of an object
Class Object{
public
$foo="bar";
};

$objectVar = new Object();
$reference =& $objectVar;
$assignment = $objectVar

//
// $objectVar --->+---------+
// |(handle1)----+
// $reference --->+---------+ |
// |
// +---------+ |
// $assignment -->|(handle1)----+
// +---------+ |
// |
// v
// Object(1):foo="bar"
//
?>

$assignment has a different data slot from $objectVar, but its data slot holds a handle to the same object. This makes it behave in some ways like a reference. If you use the variable $objectVar to change the state of the Object instance, those changes also show up under $assignment, because it is pointing at that same Object instance.

<?php
$objectVar
->foo = "qux";
print_r( $objectVar );
print_r( $reference );
print_r( $assignment );

//
// $objectVar --->+---------+
// |(handle1)----+
// $reference --->+---------+ |
// |
// +---------+ |
// $assignment -->|(handle1)----+
// +---------+ |
// |
// v
// Object(1):foo="qux"
//
?>

But it is not exactly the same as a reference. If you null out $objectVar, you replace the handle in its data slot with NULL. This means that $reference, which points at the same data slot, will also be NULL. But $assignment, which is a different data slot, will still hold its copy of the handle to the Object instance, so it will not be NULL.

<?php
$objectVar
= null;
print_r($objectVar);
print_r($reference);
print_r($assignment);

//
// $objectVar --->+---------+
// | NULL |
// $reference --->+---------+
//
// +---------+
// $assignment -->|(handle1)----+
// +---------+ |
// |
// v
// Object(1):foo="qux"
?>
up
84
kStarbe at gmail point com
6 years ago
You start using :: in second example although the static concept has not been explained. This is not easy to discover when you are starting from the basics.
up
129
Doug
13 years ago
What is the difference between $this and self ?

Inside a class definition, $this refers to the current object, while self refers to the current class.

It is necessary to refer to a class element using self ,
and refer to an object element using $this .
Note also how an object variable must be preceded by a keyword in its definition.

The following example illustrates a few cases:

<?php
class Classy {

const
STAT = 'S' ; // no dollar sign for constants (they are always static)
static $stat = 'Static' ;
public
$publ = 'Public' ;
private
$priv = 'Private' ;
protected
$prot = 'Protected' ;

function
__construct( ){ }

public function
showMe( ){
print
'<br> self::STAT: ' . self::STAT ; // refer to a (static) constant like this
print '<br> self::$stat: ' . self::$stat ; // static variable
print '<br>$this->stat: ' . $this->stat ; // legal, but not what you might think: empty result
print '<br>$this->publ: ' . $this->publ ; // refer to an object variable like this
print '<br>' ;
}
}
$me = new Classy( ) ;
$me->showMe( ) ;

/* Produces this output:
self::STAT: S
self::$stat: Static
$this->stat:
$this->publ: Public
*/
?>
up
24
Hayley Watson
6 years ago
Class names are case-insensitive:
<?php
class Foo{}
class
foo{} //Fatal error.
?>

Any casing can be used to refer to the class
<?php
class bAr{}
$t = new Bar();
$u = new bar();
echo (
$t instanceof $u) ? "true" : "false"; // "true"
echo ($t instanceof BAR) ? "true" : "false"; // "true"
echo is_a($u, 'baR') ? "true" : "false"; // "true"
?>

But the case used when the class was defined is preserved as "canonical":
<?php
echo get_class($t); // "bAr"
?>

And, as always, "case-insensitivity" only applies to ASCII.
<?php
class пасха{}
class
Пасха{} // valid
$p = new ПАСХА(); // Uncaught warning.
?>
up
67
wbcarts at juno dot com
15 years ago
CLASSES and OBJECTS that represent the "Ideal World"

Wouldn't it be great to get the lawn mowed by saying $son->mowLawn()? Assuming the function mowLawn() is defined, and you have a son that doesn't throw errors, the lawn will be mowed.

In the following example; let objects of type Line3D measure their own length in 3-dimensional space. Why should I or PHP have to provide another method from outside this class to calculate length, when the class itself holds all the neccessary data and has the education to make the calculation for itself?

<?php

/*
* Point3D.php
*
* Represents one locaton or position in 3-dimensional space
* using an (x, y, z) coordinate system.
*/
class Point3D
{
public
$x;
public
$y;
public
$z; // the x coordinate of this Point.

/*
* use the x and y variables inherited from Point.php.
*/
public function __construct($xCoord=0, $yCoord=0, $zCoord=0)
{
$this->x = $xCoord;
$this->y = $yCoord;
$this->z = $zCoord;
}

/*
* the (String) representation of this Point as "Point3D(x, y, z)".
*/
public function __toString()
{
return
'Point3D(x=' . $this->x . ', y=' . $this->y . ', z=' . $this->z . ')';
}
}

/*
* Line3D.php
*
* Represents one Line in 3-dimensional space using two Point3D objects.
*/
class Line3D
{
$start;
$end;

public function
__construct($xCoord1=0, $yCoord1=0, $zCoord1=0, $xCoord2=1, $yCoord2=1, $zCoord2=1)
{
$this->start = new Point3D($xCoord1, $yCoord1, $zCoord1);
$this->end = new Point3D($xCoord2, $yCoord2, $zCoord2);
}

/*
* calculate the length of this Line in 3-dimensional space.
*/
public function getLength()
{
return
sqrt(
pow($this->start->x - $this->end->x, 2) +
pow($this->start->y - $this->end->y, 2) +
pow($this->start->z - $this->end->z, 2)
);
}

/*
* The (String) representation of this Line as "Line3D[start, end, length]".
*/
public function __toString()
{
return
'Line3D[start=' . $this->start .
', end=' . $this->end .
', length=' . $this->getLength() . ']';
}
}

/*
* create and display objects of type Line3D.
*/
echo '<p>' . (new Line3D()) . "</p>\n";
echo
'<p>' . (new Line3D(0, 0, 0, 100, 100, 0)) . "</p>\n";
echo
'<p>' . (new Line3D(0, 0, 0, 100, 100, 100)) . "</p>\n";

?>

<-- The results look like this -->

Line3D[start=Point3D(x=0, y=0, z=0), end=Point3D(x=1, y=1, z=1), length=1.73205080757]

Line3D[start=Point3D(x=0, y=0, z=0), end=Point3D(x=100, y=100, z=0), length=141.421356237]

Line3D[start=Point3D(x=0, y=0, z=0), end=Point3D(x=100, y=100, z=100), length=173.205080757]

My absolute favorite thing about OOP is that "good" objects keep themselves in check. I mean really, it's the exact same thing in reality... like, if you hire a plumber to fix your kitchen sink, wouldn't you expect him to figure out the best plan of attack? Wouldn't he dislike the fact that you want to control the whole job? Wouldn't you expect him to not give you additional problems? And for god's sake, it is too much to ask that he cleans up before he leaves?

I say, design your classes well, so they can do their jobs uninterrupted... who like bad news? And, if your classes and objects are well defined, educated, and have all the necessary data to work on (like the examples above do), you won't have to micro-manage the whole program from outside of the class. In other words... create an object, and LET IT RIP!
up
29
moty66 at gmail dot com
14 years ago
I hope that this will help to understand how to work with static variables inside a class

<?php

class a {

public static
$foo = 'I am foo';
public
$bar = 'I am bar';

public static function
getFoo() { echo self::$foo; }
public static function
setFoo() { self::$foo = 'I am a new foo'; }
public function
getBar() { echo $this->bar; }
}

$ob = new a();
a::getFoo(); // output: I am foo
$ob->getFoo(); // output: I am foo
//a::getBar(); // fatal error: using $this not in object context
$ob->getBar(); // output: I am bar
// If you keep $bar non static this will work
// but if bar was static, then var_dump($this->bar) will output null

// unset($ob);
a::setFoo(); // The same effect as if you called $ob->setFoo(); because $foo is static
$ob = new a(); // This will have no effects on $foo
$ob->getFoo(); // output: I am a new foo

?>

Regards
Motaz Abuthiab
up
4
pawel dot zimnowodzki at gmail dot com
1 year ago
Although there is no null-safe operator for not existed array keys I found workaround for it: ($array['not_existed_key'] ?? null)?->methodName()
up
38
Notes on stdClass
14 years ago
stdClass is the default PHP object. stdClass has no properties, methods or parent. It does not support magic methods, and implements no interfaces.

When you cast a scalar or array as Object, you get an instance of stdClass. You can use stdClass whenever you need a generic object instance.
<?php
// ways of creating stdClass instances
$x = new stdClass;
$y = (object) null; // same as above
$z = (object) 'a'; // creates property 'scalar' = 'a'
$a = (object) array('property1' => 1, 'property2' => 'b');
?>

stdClass is NOT a base class! PHP classes do not automatically inherit from any class. All classes are standalone, unless they explicitly extend another class. PHP differs from many object-oriented languages in this respect.
<?php
// CTest does not derive from stdClass
class CTest {
public
$property1;
}
$t = new CTest;
var_dump($t instanceof stdClass); // false
var_dump(is_subclass_of($t, 'stdClass')); // false
echo get_class($t) . "\n"; // 'CTest'
echo get_parent_class($t) . "\n"; // false (no parent)
?>

You cannot define a class named 'stdClass' in your code. That name is already used by the system. You can define a class named 'Object'.

You could define a class that extends stdClass, but you would get no benefit, as stdClass does nothing.

(tested on PHP 5.2.8)
up
1
johannes dot kingma at gmail dot com
2 years ago
BEWARE!

Like Hayley Watson pointed out class names are not case sensitive.

<?php
class Foo{}
class
foo{} // Fatal error: Cannot declare class foo, because the name is already in use
?>
As well as
<?php
class BAR{}
$bar = new Bar();
echo
get_class($bar);
?>

Is perfectly fine and will return 'BAR'.

This has implications on autoloading classes though. The standard spl_autoload function will strtolower the class name to cope with case in-sensitiveness and thus the class BAR can only be found if the file name is bar.php (or another variety if an extension was registered with spl_autoload_extensions(); ) not BAR.php for a case sensitive file and operating system like linux. Windows file system is case sensitive but the OS is not and there for autoloading BAR.php will work.
up
4
Anonymous
5 years ago
At first I was also confused by the assignment vs referencing but here's how I was finally able to get my head around it. This is another example which is somewhat similar to one of the comments but can be helpful to those who did not understand the first example. Imagine object instances as rooms where you can store and manipulate your properties and functions. The variable that contains the object simply holds 'a key' to this room and thus access to the object. When you assign this variable to another new variable, what you are doing is you're making a copy of the key and giving it to this new variable. That means these two variable now have access to the same 'room' (object) and can thus get in and manipulate the values. However, when you create a reference, what you doing is you're making the variables SHARE the same key. They both have access to the room. If one of the variable is given a new key, then the key that they are sharing is replaced and they now share a new different key. This does not affect the other variable with a copy of the old key...that variable still has access to the first room
up
14
Jeffrey
15 years ago
A PHP Class can be used for several things, but at the most basic level, you'll use classes to "organize and deal with like-minded data". Here's what I mean by "organizing like-minded data". First, start with unorganized data.

<?php
$customer_name
;
$item_name;
$item_price;
$customer_address;
$item_qty;
$item_total;
?>

Now to organize the data into PHP classes:

<?php
class Customer {
$name; // same as $customer_name
$address; // same as $customer_address
}

class
Item {
$name; // same as $item_name
$price; // same as $item_price
$qty; // same as $item_qty
$total; // same as $item_total
}
?>

Now here's what I mean by "dealing" with the data. Note: The data is already organized, so that in itself makes writing new functions extremely easy.

<?php
class Customer {
public
$name, $address; // the data for this class...

// function to deal with user-input / validation
// function to build string for output
// function to write -> database
// function to read <- database
// etc, etc
}

class
Item {
public
$name, $price, $qty, $total; // the data for this class...

// function to calculate total
// function to format numbers
// function to deal with user-input / validation
// function to build string for output
// function to write -> database
// function to read <- database
// etc, etc
}
?>

Imagination that each function you write only calls the bits of data in that class. Some functions may access all the data, while other functions may only access one piece of data. If each function revolves around the data inside, then you have created a good class.
To Top