str_getcsv
Here are some minor tweaks to-n00b-at-battleofthebits-dot-org's excellent function.
1) The token was set to an ASCII value 1 (which could be changed as was previously noted)
2) The $c++ was not needed
3) The while statement is not necessary for the final replacement
4) Note that this does not allow use of arrays for search and replace terms. That could be implemented using loops.
<?php
if(!function_exists('str_ireplace')){
function str_ireplace($search,$replace,$subject){
$token = chr(1);
$haystack = strtolower($subject);
$needle = strtolower($search);
while (($pos=strpos($haystack,$needle))!==FALSE){
$subject = substr_replace($subject,$token,$pos,strlen($search));
$haystack = substr_replace($haystack,$token,$pos,strlen($search));
}
$subject = str_replace($token,$replace,$subject);
return $subject;
}
}
?>
Descripción
Esta función devuelve una cadena o una matriz con todas las ocurrencias de busqueda en asunto (ignorando mayúsculas y minúsculas) sustituidas por el reemplazo dado. Si no necesita reglas de reemplazo sofisticadas, usted debería, por lo general, usar esta función en lugar de eregi_replace() o preg_replace() con el modificador i.
Lista de parámetros
- busqueda
-
Note: Cada reemplazo con la matriz busqueda es realizado en el resultado del reemplazo previo.
- reemplazo
-
- asunto
-
Si asunto es una matriz, entonces las búsquedas y reemplazos son realizados con cada entrada de asunto , y el valor devuelto es asimismo una matriz.
- conteo
-
El número de agujas coincidentes y reemplazadas será devuelto en conteo , que es pasado por referencia.
Si busqueda y reemplazo son matrices, entonces str_ireplace() toma un valor de cada matriz y los usa para realizar las búsquedas y reemplazos sobre asunto . Si reemplazo tiene menos valores que busqueda , entonces se usa una cadena vacía para el resto de valores de reemplazo. Si busqueda es una matriz y reemplazo es una cadena, entonces esta cadena de reemplazo es usada para cada valor de busqueda .
Valores retornados
Devuelve una cadena o una matriz de reemplazos.
Registro de cambios
| Versión | Descripción |
|---|---|
| 5.0.0 | El parámetro conteo fue agregado. |
Ejemplos
Example #1 Ejemplo de str_ireplace()
<?php
$etiqueta_body = str_ireplace("%body%", "black", "<body text=%BODY%>");
?>
Notes
Note: Esta función es segura con material binario.
add a note
User Contributed Notesstr_ireplace
mvpetrovich
16-Feb-2008 12:28
16-Feb-2008 12:28
n00b at battleofthebits dot org
21-Jul-2007 08:54
21-Jul-2007 08:54
Dreamhost hasn't upgraded to PHP 5.0 -- I came up with my own alternative, trying to make it run as much like str_ireplace() as possible. Adjust the switch-a-roo token if you think it may conflict with your needle in teh haystack.
## HOMEBREW str_ireplace() FOR PRE-PHP 5.0
if (!function_exists('str_ireplace') {
function str_ireplace($search,$replace,$subject) {
$token = '^[[term^]';
$haystack = strtolower($subject);
$needle = strtolower($search);
while (($pos=strpos($haystack,$needle))!==FALSE) {
$c++;
$subject = substr_replace($subject,$token,$pos,strlen($search));
$haystack = substr_replace($haystack,$token,$pos,strlen($search));
}
while (($pos=strpos($subject,$token))!==FALSE) {
$subject = substr_replace($subject,$replace,$pos,strlen($token));
}
return $subject;
}
}
lev at taintedthoughts dot com
12-Jun-2007 05:03
12-Jun-2007 05:03
There appears to be a "bug" with this function in at least version 5.2.1.
If you attempt to use the function while replacing special characters, such as new lines, it will cause your entire scripts to fail. It resulted in my browser (Firefox 2) trying to download the file instead of parsing it.
Here is example code which will cause problems:
<?php
$sometext = "this is some text\n";
$sometext .= "that has a new line in it";
echo break_lines($sometext);
function break_lines ($text)
{
return str_ireplace("\n", "<br/>", $text);
}
?>
However, if you simply get rid of the "i" and use the normal str_replace, the page will load just fine.
I have also tried the same code on 5.2.3 and this version does NOT have the same problem, so it does appear to be an issue that was resolved with the newest builds of php.
I don't think it was a result of my personal environment, but I am running Debian-Sarge, Apache 2 and PHP 5.2.1/5.2.3.
hans111 at yahoo dot com
31-Jan-2007 01:26
31-Jan-2007 01:26
Yet another one str_ireplace ireplacement, this one will take arrays as $search and $replace
<?php
function make_pattern(&$pat, $key) {
$pat = '/'.preg_quote($pat, '/').'/i';
}
if(!function_exists('str_ireplace')){
function str_ireplace($search, $replace, $subject){
if(is_array($search)){
array_walk($search, 'make_pattern');
}
else{
$search = '/'.preg_quote($search, '/').'/i';
}
return preg_replace($search, $replace, $subject);
}
}
?>
René Johnson
05-Nov-2006 09:37
05-Nov-2006 09:37
str_ireplace for php below version 5. :)
if(!function_exists('str_ireplace')) {
function str_ireplace($search,$replace,$subject) {
$search = preg_quote($search, "/");
return preg_replace("/".$search."/i", $replace, $subject); } }
hans111
02-Aug-2006 10:25
02-Aug-2006 10:25
<?php
if(!function_exists('str_ireplace')) {
function str_ireplace($search, $replacement, $string){
$delimiters = array(1,2,3,4,5,6,7,8,14,15,16,17,18,19,20,21,22,23,24,25,
26,27,28,29,30,31,33,247,215,191,190,189,188,187,186,
185,184,183,182,180,177,176,175,174,173,172,171,169,
168,167,166,165,164,163,162,161,157,155,153,152,151,
150,149,148,147,146,145,144,143,141,139,137,136,135,
134,133,132,130,129,128,127,126,125,124,123,96,95,94,
63,62,61,60,59,58,47,46,45,44,38,37,36,35,34);
foreach ($delimiters as $d) {
if (strpos($string, chr($d))===false){
$delimiter = chr($d);
break;
}
}
if (!empty($delimiter)) {
return preg_replace($delimiter.quotemeta($search).$delimiter.'i', $replacement, $string);
}
else {
trigger_error('Homemade str_ireplace could not find a proper delimiter.', E_USER_ERROR);
}
}
}
?>
hfuecks at nospam dot org
04-Jul-2005 11:07
04-Jul-2005 11:07
Note that character case is being defined by your server's locale setting, which effects strings containing non-ASCII characters.
See strtolower() - http://www.php.net/strtolower and comments - internally str_ireplace converts $search and $replace to lowercase to find matches.
daevid at daevid dot com
05-Apr-2005 10:14
05-Apr-2005 10:14
here's a neat little function I whipped up to do HTML color coding of SQL strings.
<?php
/**
* Output the HTML debugging string in color coded glory for a sql query
* This is very nice for being able to see many SQL queries
* @access public
* @return void. prints HTML color coded string of the input $query.
* @param string $query The SQL query to be executed.
* @author Daevid Vincent [daevid@LockdownNetworks.com]
* @version 1.0
* @date 04/05/05
* @todo highlight SQL functions.
*/
function SQL_DEBUG( $query )
{
if( $query == '' ) return 0;
global $SQL_INT;
if( !isset($SQL_INT) ) $SQL_INT = 0;
//[dv] this has to come first or you will have goofy results later.
$query = preg_replace("/['\"]([^'\"]*)['\"]/i", "'<FONT COLOR='#FF6600'>$1</FONT>'", $query, -1);
$query = str_ireplace(
array (
'*',
'SELECT ',
'UPDATE ',
'DELETE ',
'INSERT ',
'INTO',
'VALUES',
'FROM',
'LEFT',
'JOIN',
'WHERE',
'LIMIT',
'ORDER BY',
'AND',
'OR ', //[dv] note the space. otherwise you match to 'COLOR' ;-)
'DESC',
'ASC',
'ON '
),
array (
"<FONT COLOR='#FF6600'><B>*</B></FONT>",
"<FONT COLOR='#00AA00'><B>SELECT</B> </FONT>",
"<FONT COLOR='#00AA00'><B>UPDATE</B> </FONT>",
"<FONT COLOR='#00AA00'><B>DELETE</B> </FONT>",
"<FONT COLOR='#00AA00'><B>INSERT</B> </FONT>",
"<FONT COLOR='#00AA00'><B>INTO</B></FONT>",
"<FONT COLOR='#00AA00'><B>VALUES</B></FONT>",
"<FONT COLOR='#00AA00'><B>FROM</B></FONT>",
"<FONT COLOR='#00CC00'><B>LEFT</B></FONT>",
"<FONT COLOR='#00CC00'><B>JOIN</B></FONT>",
"<FONT COLOR='#00AA00'><B>WHERE</B></FONT>",
"<FONT COLOR='#AA0000'><B>LIMIT</B></FONT>",
"<FONT COLOR='#00AA00'><B>ORDER BY</B></FONT>",
"<FONT COLOR='#0000AA'><B>AND</B></FONT>",
"<FONT COLOR='#0000AA'><B>OR</B> </FONT>",
"<FONT COLOR='#0000AA'><B>DESC</B></FONT>",
"<FONT COLOR='#0000AA'><B>ASC</B></FONT>",
"<FONT COLOR='#00DD00'><B>ON</B> </FONT>"
),
$query
);
echo "<FONT COLOR='#0000FF'><B>SQL[".$SQL_INT."]:</B> ".$query."<FONT COLOR='#FF0000'>;</FONT></FONT><BR>\n";
$SQL_INT++;
} //SQL_DEBUG
?>
aidan at php dot net
21-Aug-2004 09:58
21-Aug-2004 09:58
If you want to do string highlighting, for example highlighting search terms, try str_highlight().
http://aidanlister.com/repos/v/function.str_highlight.php
aidan at php dot net
30-May-2004 07:36
30-May-2004 07:36
This functionality is now implemented in the PEAR package PHP_Compat.
More information about using this function without upgrading your version of PHP can be found on the below link:
http://pear.php.net/package/PHP_Compat